BluBat 52-67-79

The BluBat family of systems are floating, sleeper based systems that offer system thickness flexibility when matching existing slab recesses. BluBat Systems offer a good value price point and are designed for use over flat subfloors.

The top solid hardwood is fastened to a resilient subfloor system consisting of 8’ long, ply-construction sleepers with a continuous layer of blue foam shock absorbing padding.

The available sleeper thickness are 1 1/8” (30mm), 1 ¾” (45mm) and 2 ¼” (57mm).

BluBAT_JUNCKERS_KONSTRUKTION_1227.jpg

Facts

Performance Area-elastic according to EN 14904
Use Basketball, volleyball, racquetball, squash, multi-use facilities
Hardwood type Prefinished 7/8” (22mm) solid hardwood
System construction Single layer sleeper system
Sleeper spacing 13 ¼” (336 mm) or 16 3/16” (411 mm)
Required subfloor Flat
Total floor system thickness. 2 1/8” (52 mm), 2 5/8” (67 mm), 3 1/8” (79 mm)
Junckers 25 years fatigue test
Sanding and refinishing Yes, 8-10 times to bare wood
Compatible with radient heating Yes
BluBAT_med systemkomponenter.jpg
SYSTEM COMPONENTS

1. 7/8" (22 mm) x 5" (129 mm) x 12’ (3700 mm) solid hardwood
2. BluBAT sleeper system including sports foam
3. Polythene moisture barrier
4. Beech Sport Wall Base

  Test results
  Requirements
EN 14904:A3
Sleeper Spacing 16 3/16" Sleeper Spacing 13 1/4"
Shock absorption ≥40 <55% 55 % 53 %
Vertical deformation ≥1.8 <3.5mm 1.9 mm 1.8 mm
Ball Bounce ≥90% 100 % 98 %
Friction ≥80 ≤110 ~ 85 ~ 85
Rolling load ≥1500N ✓ 3000 N1 ✓ 3500 N1
Point load None 5000 N ~ 500 kgs2 5500 N ~ 550 kgs2
1)Junckers test with solid rubber wheels: width 50mm, diameter 100mm.
2)Junckers test with 100x100mm point load.

Resources

Solid hardwood flooring choices

A Junckers sports floor is made from 100% solid hardwood and will last for generations. Each plank is made from two rows of staves and is tongue and groove jointed on all four sides.

The floors are extremely stable and therefore minimizes challenges when humidity levels change through the year. We take far longer than normal over the drying process to ensure the movements that occur naturally in all wood is fully controlled and kept to a minimum. Our Beech and Maple sports floors are dried using Junckers unique press drying method.

Our floors are ready to use as soon as they are installed. This is because Junckers floors are sealed in the factory with our own produced hard wearing polyurethane.

All Junckers solid hardwood sports floors have the Danish Indoor Climate Certificate for low emissions of organic substances and can be delivered with either a FSC® or PEFC™ accreditation.

The installation process is always fast, easy and clean. Each prefinished plank is 12 foot long, and covers approximately 5 square feet.