VINYL ADHESIVE
PRODUCT INFORMATION

H 6.7

 


GENERAL DESCRIPTION

For glueing of Junckers Sports Vinyl TopFlex, EliteFlex and CombiPro onto 22 mm chipboards.

Package size: 13.8 kg / 10 L (sufficient for approx. 37 m²).

Density: Approx. 1.38 kg/litre.

Colour: Light beige.

Texture: Pasty, thixotropic.

Solid content: Approx. 74 %.

TECHNICAL DATA

Basis: Waterbased co-polymer dispersion.

Solvents: None.

Consumption: Approx. 325 g/m².

Airing time: Approx. 5-20 minutes on absorbent chipboard.

Open time: Wet glueing: 15-30 minutes.

Application temperature: Best at 18-25 °C.

Application tool: Junckers Spatula A2.

Cleaning: Water, before adhesive dries.

Shelf life: Minimum 1 year in unopened packaging when stored cool. Store frost free.


INSTRUCTIONS FOR USE

Stir/shake the adhesive well before use. Use Junckers Spatula A2 and apply uniformly on the chipboards. Avoid adhesive pools.

Lay down vinyl covering following appropriate airing time and press well. Press again after a short time.

Please note!
Do not use the adhesive if the temperature in the room or the adhesive is below 15 °C. Warm up the floor covering and adhesive in time in cold weather.

The variety of materials used and the different construction site conditions, which lie beyond our control, preclude any claims based on this data. We therefore recommend making sufficient trials.

Accompanying Junckers Vinyl Sports Floor Laying Instructions must be observed.


IMPORTANT

Before using the product, read the label on the container carefully and observe the recommended precautionary measures.

See Material Safety Data Sheet for detailed information about precautionary measures.

keyboard_arrow_up



picture_as_pdf