For gluing of 22 mm chipboards to Junckers sports battens when installing Junckers TopFlex, EliteFlex and CombiPro Sports Floor System.
Package size: Tubular bags of 600 ml / 936 g.
Density: Approx. 1.56 kg/litre.
Colour: Zinc grey.
Texture: Thixotropic mass, easily workable.
Solid content: 100 %.
Basis: Silane Modified Polymer (SMP).
Consumption: Approx. 60 g per linear metre (sufficient for approx. 16-17 linear metre).
Drying time: Full strength after 1-2 days.
Open time: Wet glueing: 0-40 minutes.
Application temperature: Best at 18-22 °C.
Shelf life: Minimum 2 years in unopened packaging when stored cool and dry.
INSTRUCTIONS FOR USE
Apply adhesive evenly on top of the battens in lines a little shorter than boards are wide (this to allow tight fitting of board joints).
Do not use the adhesive if the temperature in the room or the adhesive is below 15 °C. Warm up the adhesive in time in cold weather.
Accompanying Junckers Vinyl Sports Floor Laying Instructions must be observed.
Before using the product, read the label on the container carefully and observe the recommended precautionary measures.
See Material Safety Data Sheet for detailed information about precautionary measures.